Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Bolt, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet and dry gas at 400 Degree F (205 Degree C). Annealing of our Nickel 201 Hex Head Nuts for periods of 1 hour or more at temperatures above 1700 Degree F (925 Degree C) will result in hardness.
Nickel Alloy 201 Bolt Manufacturer In India | Nickel Alloy 201 Bolt Manufacturer In Mumbai | Nickel Alloy 201 Bolt Exporter In India | Nickel Alloy 201 Bolt Exporter In Mumbai| Nickel Alloy 201 Bolt Supplier In India | Nickel Alloy 201 Bolt Supplier In Mumbai| Nickel Alloy 201 Bolt Stockist In India | Nickel Alloy 201 Bolt Stockist In Mumbai
Heat treatment for these Nickel 201 Square Bolts, commonly called a dead – soft anneal, is used only in specialized applications such as burst diaphragms because of the low mechanical properties and coarse grain structure produced. Dry hydrogen and dissociated ammonia are preferred for our Nickel 201 Square Nuts, but less expensive atmospheres like partially burned natural gas will also provide adequate brightness.
Heating in oxidizing atmospheres for these Nickel 201 Eye Bolts at high temperatures should be avoided because of the danger of inter – granular oxidation. Our Nickel 201 Eye Nuts is sensitive to inter – granular attack from Sulphur and metals such as lead, tin, zinc, and bismuth that have low melting points. Scrupulous care must be exercised in these Nickel 201 Hex Bolts to remove all traces of forming lubricants, marking paints and shop soil prior to heating.
Alloy 201 Bolt/Nut Specifications |
||
| Specifications | : | ASTM B 164 ASME SB 164 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 201 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
201 Nickel Alloy Bolt/Nut Chemical Composition
| Nickel 201 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
| Balance | 0.15 max | – | 0.35 max | 0.35 max | 0.40 max | – | 0.01 max | 0.25 max | – |
Nickel Alloy 201 Bolt/Nut Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
Equivalent Grades for 201 Nickel Bolt/Nut
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Nickel 201 | N02201 | 2.4068 | – | LC-Ni 99 | NW 2201 | NA 12 | НП-2 |
Alloy 201 Bolt/Nut Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
201 Nickel Alloy Bolt/Nut Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 201 Bolt
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Bolt, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet and dry gas at 400 Degree F (205 Degree C)
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5