Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347 Angle, which is not expected to migrate easily into soil or groundwater based upon its insoluble form. Nevertheless, if finely divided, Stainless Steel 347 Angle becomes mobile in water and contaminates soil and groundwater. The resistance to corrosion and staining, low maintenance, and familiar lustre make Stainless Steel 347 C-Channel an ideal material for many applications. Stainless Steel 347 H-Beam differs from carbon steel by the amount of chromium present. Unprotected Stainless Steel 347 I-Beam rusts readily when exposed to air and moisture.
Stainless Steel 347 Angle Manufacturer In India | Stainless Steel 347 Angle Manufacturer In Mumbai | Stainless Steel 347 Angle Exporter In India | Stainless Steel 347 Angle Exporter In Mumbai | Stainless Steel 347 Angle Supplier In India | Stainless Steel 347 Angle Supplier In Mumbai | Stainless Steel 347 Angle Stockist In India | Stainless Steel 347 Angle Stockist In Mumbai
Stainless Steel 347 T-Beam have 0.03 % carbon maximum, which are resistant to sensitization in short – term exposures or heat treatments. Stainless Steel 347 Chain often has slightly lower minimum strengths than standard stainless steels. 347 Stainless Steel Angle have 0.08 % maximum carbon and are suitable for use in non – welded parts and equipment; in case of welded applications these parts are used for light-gauge applications. 347 Stainless Steel C-Channel has lower cost; reduced corrosion resistance and resulting discoloration are acceptable.
347 Stainless Steel H-Beam manufactured from these solid products would be generally classified as non – hazardous. However, some metallic elements contained in 347 Stainless Steel I-Beam have been determined to be toxic and are subject to regulatory controls. In fact, 347 Stainless Steel T-Beam may persist in the environment for long periods, based upon its corrosion resistant, insoluble, and non – biodegradable properties.
SS 347 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 347 Angle |
: | 5mm to 9mm |
| SS 347 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 347 Beam | : | 3″ thru 12.31″ |
| SS 347 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
347 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347 | 0.08 max | 2 max | 1 max | 0.045 max | 0.030 max | 17-20 | 10xC – 1.10 | 9.0-13.0 | 62.74 min |
Stainless Steel 347 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 347 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
347 Steel Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347 Angle
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347 Angle, which is not expected to migrate easily into soil or groundwater based upon its insoluble form. Nevertheless, if finely divided, Stainless Steel 347 Angle becomes mobile in water and contaminates soil and groundwater.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5