Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 317L Round Bars, which may contain molybdenum contents of up to 5 % and nitrogen of up to 0.4 %. Stainless Steel 317L Square Bars are magnetic, and offer increased tensile and yield strength over the other categories. When specifying stainless steel chemistry, Stainless Steel 317L Flat Bars is important to reference the appropriate ASTM standard and the UNS (Unified Numbering System) number associated with the specific alloy or grade. UNS numbers of Stainless Steel 317L Threaded Bars are internationally recognized specific chemistry requirements.
Stainless Steel 317L Round Bars Manufacturer In India | Stainless Steel 317L Round Bars Manufacturer In Mumbai | Stainless Steel 317L Round Bars Exporter In India | Stainless Steel 317L Round Bars Exporter In Mumbai | Stainless Steel 317L Round Bars Supplier In India | Stainless Steel 317L Round Bars Supplier In Mumbai | Stainless Steel 317L Round Bars Stockist In India | Stainless Steel 317L Round Bars Stockist In Mumbai
If common names such as AISI numbers are referenced, the UNS number of Stainless Steel 317L Hollow Bars should also be used to avoid confusion. The many unique values provided by Stainless Steel 317L Hexagonal Bars make it a powerful candidate in materials selection. The bright, easily maintained surface of Stainless Steel 317L Triangular Bars provides a modern and attractive appearance. Engineers and designers often underestimate or overlook these values of Stainless Steel 317L Bars because of what is viewed as the higher initial cost of stainless steel.
However, over the total life of a project, Stainless Steel 317L Rods is often the best value option. 317L Stainless Steel Round Bars resist corrosion in atmospheric and pure water environments, while high – alloyed grades can resist corrosion in most acids, alkaline solutions, and chlorine bearing environments, properties which are utilized in process plants.
SS 317L Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 317L Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 317L Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 317L Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 317L Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 317L Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
317L Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317L | 0.035 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 18 – 20 | 3.0-4.0 | 11.0-15.0 | 57.89 min |
Stainless Steel 317L Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 317L Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | – |
SS 317L Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
317L Steel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 317L Round Bars
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 317L Round Bars, which may contain molybdenum contents of up to 5 % and nitrogen of up to 0.4 %. Stainless Steel 317L Square Bars are magnetic, and offer increased tensile and yield strength over the other categories. When specifying stainless steel chemistry, Stainless Steel 317L Flat Bars is important to reference the appropriate ASTM standard and the UNS (Unified Numbering System) number associated with the specific alloy or grade. UNS numbers of Stainless Steel 317L Threaded Bars are internationally recognized specific chemistry requirements.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5