Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Brass Round Bar, which may also be prone to ‘knife line attack’ in the heat – affected zones of welds, very close to the fusion zone where the carbo – nitrides have re – dissolved in the solid steel matrix. The weldability of Brass Square Bars can be assumed to be similar, where neither of the grades can be expected to weld ‘easier’ or ‘better’ than – the – other. Niobium stabilised fillers (welding consumables) should be used for welding Brass Flat Bars, especially where elevated temperature weld strength may be important.
Brass Round Bar Manufacturer In India | Brass Round Bar Manufacturer In Mumbai | Brass Round Bar Exporter In India | Brass Round Bar Exporter In Mumbai | Brass Round Bar Supplier In India | Brass Round Bar Supplier In Mumbai | Brass Round Bar Stockist In India | Brass Round Bar Stockist In Mumbai
In other circumstances, Brass Threaded Bars should give a matching weld metal aqueous corrosion resistance to that of the ‘parent’ material. Resistance to sensitisation is achieved in Brass Hollow Bars with titanium additions to stabilize the structure against chromium carbide precipitation, which is the source of sensitization. Brass Hexagonal Bars are more resistant to general corrosion and pitting / crevice corrosion than the conventional chromium – nickel austenitic stainless steels.
Brass Triangular Bars also offer higher creep, stress – rupture and tensile strength at elevated temperature. This significantly reduces susceptibility to sensitisation of Brass Bars in service by limiting the formation of chromium carbides. Brass Rods is fully heat treatable (solution heat treatment plus aging) in sections up to 25mm and can be employed up to around 400 Degree C.
Brass Round Bar Specifications |
||
| Specifications | : | ASTM B62 / ASTM SB62 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Brass Round Bar Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Round Bar Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
Brass Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Round Bar
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Brass Round Bar, which may also be prone to ‘knife line attack’ in the heat – affected zones of welds, very close to the fusion zone where the carbo – nitrides have re – dissolved in the solid steel matrix. The weldability of Brass Square Bars can be assumed to be similar, where neither of the grades can be expected to weld ‘easier’ or ‘better’ than – the – other. Niobium stabilised fillers (welding consumables) should be used for welding Brass Flat Bars, especially where elevated temperature weld strength may be important.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5