Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Tube to Female Pipes similar to parker and Swagelok, which has shown moderate to poor resistance to hydrochloric acid. In sulphuric acid, Hastelloy C22 Tube Fittings has shown useful resistance to concentrations of up to about 30 % at a temperature of 175 Degree F and about 10 % at boiling temperature. Laboratory tests of Hastelloy C22 Compression Fittings at 175 Degree F have produced corrosion rates at 10 % concentration.
Hastelloy C22 Tube to Female Pipes Manufacturer In India | Hastelloy C22 Tube to Female Pipes Manufacturer In Mumbai | Hastelloy C22 Tube to Female Pipes Exporter In India | Hastelloy C22 Tube to Female Pipes Exporter In Mumbai | Hastelloy C22 Tube to Female Pipes Supplier In India | Hastelloy C22 Tube to Female Pipes Supplier In Mumbai | Hastelloy C22 Tube to Female Pipes Stockist In India | Hastelloy C22 Tube to Female Pipes Stockist In Mumbai
Hastelloy C22 Ferrule Fittings has excellent resistance to phosphoric acid, which also gives rates for phosphoric acid containing 1 % of hydrofluoric acid. Hastelloy C22 Double Ferrule Fittings has good fabricability, where annealing for cold forming should be done at 1900 Degree F. Forming, machining, and welding are carried out by standard procedures for Hastelloy C22 Female Connector Fittings. The temperature range of Alloy C22 Compression Tube Fittings for heavy forming or forging is 1850 Degree F to 2200 Degree F, where light working can be done at temperatures down to 1700 Degree F.
Alloy C22 Ferrule Tube Fittings is readily cold formed by conventional procedures although its work – hardening rate is high. For best results, Alloy C22 Double Ferrule Tube Fittings should be cold formed in the fine – grain condition, and frequent intermediate anneals should be used. Alloy C22 Female Connector Fittings can also be cut using any conventional plasma arc cutting system.
Hastelloy C22 Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – C220 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
C22 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition
| Hastelloy C22 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 12.5 – 14.5 | 0.50 max | 0.08 max | 2 – 6 | 0.02 max | 0.02 max | 2.5 max | 20 – 22.5 |
Hastelloy Alloy C22 Tube to Female Pipes Fitting Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 45000 , MPa – 310 | Psi – 1,00,000 , MPa – 690 | 45 % |
Equivalent Grades for C22 Hastelloy Tube to Female Pipes Fitting
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C22 | N06022 | 2.4602 | – | NiCr21Mo14W | NW 6022 | – | – |
Hastelloy Alloy C22 Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Hastelloy C22 Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Hastelloy C22 Tube to Female Pipes
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Tube to Female Pipes similar to parker and Swagelok, which has shown moderate to poor resistance to hydrochloric acid. In sulphuric acid, Hastelloy C22 Tube Fittings has shown useful resistance to concentrations of up to about 30 % at a temperature of 175 Degree F and about 10 % at boiling temperature. Laboratory tests of Hastelloy C22 Compression Fittings at 175 Degree F have produced corrosion rates at 10 % concentration.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5