Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Outlet, where our skilled specialists make use of outstanding quality material in the production procedure. Monel K500 Weldolet Fittings also has outstanding corrosion resistance together by means of increased hardness and strength of that of Monel 400 Weldolet Fittings. These Monel K500 Sweepolet Fittings has about three times the yield power and two times the tensile power when compared in the company of Monel 400 Sweepolet Fittings. These Monel K500 Threadolet Fittings is a precipitation hardenable and nickel – copper alloy, through accompaniments of titanium and aluminum.
Monel Alloy K500 Outlet Manufacturer In India | Monel Alloy K500 Outlet Manufacturer In Mumbai | Monel Alloy K500 Outlet Exporter In India | Monel Alloy K500 Outlet Exporter In Mumbai | Monel Alloy K500 Outlet Supplier In India | Monel Alloy K500 Outlet Supplier In Mumbai | Monel Alloy K500 Outlet Stockist In India | Monel Alloy K500 Outlet Stockist In Mumbai
Typical uses for Monel K500 Flexolet Fittings (UNS N05500) are impellers and pump shafts; scrapers and doctor blades; instruments and oil-well drill collars; electronic parts; valve trim and springs. Meanwhile, these Monel K500 Sockolet Fittings are also being offered in different sizes and shapes to our customers. Monel K500 Nippolet Fittings offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point. Monel K500 Latrolet Fittings is perhaps the most resistant of all commonly used engineering alloys.
Monel K500 Insertweldolet Fittings has good mechanical properties at cryogenic temperatures to moderately high temperatures up to 538 Degree C. Monel K500 Coupolet Fittings, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. This chemical composition of Monel K500 Brazolet Fittings is designed to provide exceptional resistance to several corrosive environments.
Monel K500 Outlet |
||
| Specifications | : | ASTM B366 & ASME SB366 |
| Size | : | 1/8″-4″ (DN6-DN100) |
| Dimensions | : | ASME / ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799 etc |
| Type | : | Threading outlet, Lateral Outlets, Welding Outlets, Sockt Weld Outlets, Nipple Outlets, Sweep outlets. |
Monel K500 Outlet Chemical Composition
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
| 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Monel Alloy K500 Olet Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
Equivalent Grades for Monel K500 Outlets
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
Monel Alloy K500 Outlet /Olet Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel Alloy K500 Outlet Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy K500 Outlet
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Outlet, where our skilled specialists make use of outstanding quality material in the production procedure. Monel K500 Weldolet Fittings also has outstanding corrosion resistance together by means of increased hardness and strength of that of Monel 400 Weldolet Fittings. These Monel K500 Sweepolet Fittings has about three times the yield power and two times the tensile power when compared in the company of Monel 400 Sweepolet Fittings. These Monel K500 Threadolet Fittings is a precipitation hardenable and nickel – copper alloy, through accompaniments of titanium and aluminum.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5