Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Channel And Other Brass Products, which contains about 40 % – 50 % ferrite in the annealed condition. This Brass Angle is a solid solution strengthened nickel super – alloy developed primarily as a filler metal for welding dissimilar alloys. Our Brass C-Channel has excellent dissimilar welding characteristics, and is widely used for that purpose in the gas turbine, aerospace and chemical process industries. The properties of dissimilar weld joints made with this Brass Chain are dependent upon the base metal being joined, but are generally acceptable for a wide range of combinations.
Brass Channel Manufacturer In India | Brass Channel Manufacturer In Mumbai | Brass Channel Exporter In India | Brass Channel Exporter In Mumbai | Brass Channel Supplier In India | Brass Channel Supplier In Mumbai | Brass Channel Stockist In India | Brass Channel Stockist In Mumbai
This allows our Brass I-Beam to excel in creep and fatigue resistance at high temperatures. Our Brass H-Beam also exhibits excellent nitriding and carburization resistance comparable to that of alloy 600. This Brass T-Beam has been a practical solution to chloride stress corrosion cracking problems experienced with other alloys. The high chromium, molybdenum and nitrogen contents of our Brass Angle provide corrosion resistance superior to 300 series of stainless in most environments.
These our Brass C-Channel is not suggested for operating temperatures above 600 Degree F. Brass Chain is also known as beta and near beta alloys, which are metastable and which contain sufficient beta stabilizers (such as molybdenum, silicon and vanadium) to allow them to maintain the beta phase when quenched, and which can also be solution treated and aged to improve strength.
Brass Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B62 / ASME B62 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Brass Angle |
: | 5mm to 9mm |
| Brass Channel |
: | 40mm*20mm~300mm*300mm |
| Brass Beam | : | 3″ thru 12.31″ |
| Brass Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
Brass Angle, Channel, Beam, Chain Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Angle, Channel, Beam, Chain Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
Brass Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross Brass weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy Brass
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Channel
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Channel And Other Brass Products, which contains about 40 % – 50 % ferrite in the annealed condition. This Brass Angle is a solid solution strengthened nickel super – alloy developed primarily as a filler metal for welding dissimilar alloys.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5