Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel AISI 1045 Channel And Other Carbon Steel Products, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated. This AISI 1045 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters. The resistance to a variety of corrosive conditions in our AISI 1045 Carbon Steel C-Channel led to its wide use in marine applications and other non – oxidizing chloride solutions.
Carbon Steel AISI 1045 Channel Manufacturer In India| Carbon Steel AISI 1045 Channel Manufacturer In Mumbai | Carbon Steel AISI 1045 Channel Exporter In India | Carbon Steel AISI 1045 Channel Exporter In Mumbai | Carbon Steel AISI 1045 Channel Supplier In India | Carbon Steel AISI 1045 Channel Supplier In Mumbai | Carbon Steel AISI 1045 Channel Stockist In India | Carbon Steel AISI 1045 Channel Stockist In Mumbai
As would be expected from its high copper content, this AISI 1045 Carbon Steel Chain is rapidly attacked by nitric acid and ammonia systems. This type of failure in our AISI 1045 Carbon Steel I-Beam is generally associated by means of an environment containing chlorides as well as with stress, water, dissolved oxygen, and other factors. The tendency of austenitic alloys to crack trans – granularly in chloride solutions decreases as the nickel content of our AISI 1045 Carbon Steel H-Beam is increased.
These AISI 1045 Carbon Steel T-Beam offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts. Our AISI 1045 CS Angle is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | AISI A1045 |
| Dimensions | : | EN, DIN, JIS, AISI, BS, ASME, AISI |
| Carbon Steel AISI 1045 Angle |
: | 5mm to 9mm |
| Carbon Steel AISI 1045 Channel |
: | 40mm*20mm~300mm*300mm |
| Carbon Steel AISI 1045 Beam | : | 3″ thru 12.31″ |
| Carbon Steel AISI 1045 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
AISI 1045 Angle, Channel, Beam, Chain Chemical Composition
| Grade | Mn | S | C | P | Si | Cr | Ni |
| AISI 1045 | 0.5-0.8 | 0.035 | 0.05-0.42 | 0.035 | 0.17-0.37 | 0.25 | 0.3 |
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Mechanical Properties
| Grades | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| AISI1045 | 600 | 40 | 355 | 229 |
Equivalent Grades for AISI 1045 Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| AISI 1045 | 1.1191 | G10450 |
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
AISI 1045 Steel Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel AISI 1045 Channel
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel AISI 1045 Channel And Other Carbon Steel Products, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated. This AISI 1045 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5