Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 330 Pipe Fittings to the clients, which is extensively used in high temperature environments where resistance to the combined effects of thermal cycling and carburization is necessary. Incoloy 330 Compression Pipe Fittings is a heat and corrosion resisting stainless steel alloy with good corrosion resistance and ductility and an exceptional combination of strength and resistance to carburization, oxidation, and thermal shock. During fabrication, our SS 330 Compression Pipe Fittings should not be pre – heated, inter – pass temperature should be kept low, and reinforced bead contours should be used.
Incoloy 330 Pipe Fittings Manufacturer In India | Incoloy 330 Pipe Fittings Manufacturer In Mumbai | Incoloy 330 Pipe Fittings Exporter In India | Incoloy 330 Pipe Fittings Exporter In Mumbai | Incoloy 330 Pipe Fittings Supplier In India | Incoloy 330 Pipe Fittings Supplier In Mumbai |Incoloy 330 Pipe Fittings Stockist In India | Incoloy 330 Pipe Fittings Stockist In Mumbai
Expect to use higher forces than normal in Ra 330 Compression Pipe Fittings and note its’ elevated spring-back. Our Incoloy 330 Accessories offers a high level of corrosion resistance, particularly to oxidation, nitridation and carburization. SS 330 Accessories with lower creep strength and an inability to resist surface heat treatments over long periods of time preclude their use in several heat – treating applications.
Our Ra 330 Accessories is often used in Gas Processing, Pharmaceuticals, Specialty Chemicals and more. These Alloy 330 Compression Pipe Fittings are oxidation and corrosion resistant and well-suited for service in extreme environments. Our Alloy 330 Accessories finds wide application in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required.
Incoloy 330/ SS 330/ Ra 330 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B166 ASME SB 166 |
| Size | : | 1/16″ – 2″ |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 7180 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Incoloy 330/ SS 330/ Ra 330 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cu | N | Fe |
| 330 | 0.08 max | 2 max | 0.75-1.50 | 0.030 | – | 17.0-20.0 | – | 34.0-37.0 | – |
Incoloy 330/ SS 330/ Ra 330 Accessories Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Equivalent Grades for Alloy 330/ SS 330/ Ra 330 Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Incoloy 330 | 1.4886 | N08330 | – | – | – | – | – |
Incoloy Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Incoloy 330/ SS 330/ Ra 330 Pipe Fittings / Accessories Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Incoloy 330 Pipe Fittings
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 330 Pipe Fittings to the clients, which is extensively used in high temperature environments where resistance to the combined effects of thermal cycling and carburization is necessary.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
