Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Hydraulic Fittings, where the alloying elements tend to form either solid solutions or compounds or carbides. Manganese and nickel in our Monel K500 Hydraulic Type Fittings lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements in these Monel K500 Forged Hydraulic Fittings, the austenitic structure may be obtained at room temperature. Carbide – forming elements of our Monel K500 Hydraulic Forged Fittings raise the eutectoid temperature; these elements are known as ferrite stabilizing elements.
Monel Alloy K500 Hydraulic Fittings Manufacturer In India | Monel Alloy K500 Hydraulic Fittings Manufacturer In Mumbai | Monel Alloy K500 Hydraulic Fittings Exporter In India | Monel Alloy K500 Hydraulic Fittings Exporter In Mumbai | Monel Alloy K500 Hydraulic Fittings Supplier In India | Monel Alloy K500 Hydraulic Fittings Supplier In Mumbai | Monel Alloy K500 Hydraulic Fittings Stockist In India | Monel Alloy K500 Hydraulic Fittings Stockist In Mumbai
Deposition of complex and heavy organic compounds in crude and heavy oil for these Alloy K500 Hydraulic Type Fittings can cause a number of severe problems up to pipeline blocking. Our Alloy K500 Forged Hydraulic Fittings are developed for energy – related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, these Alloy K500 Hydraulic Forged Fittings is also used in domestic, professional or industrial areas. This specification covers nominal wall and minimum wall seamless ferritic Nickel-Alloy K500 Hydraulic Fittings intended for high temperature service.
For applications requiring maximum ductility, our Nickel-Alloy K500 Hydraulic Type Fittings with low Sulphur levels can be supplied by producers using ladle – refining techniques. The easily exchangeable test pipeline of these Nickel-Alloy K500 Forged Hydraulic Fittings is filled with the sample and cooled down to a set temperature.
Monel K500 Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-K500°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Monel K500 Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Monel Alloy K500 Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Equivalent Grades for Alloy K500 Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Monel Alloy K500 Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel K500 Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy K500 Hydraulic Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Hydraulic Fittings, where the alloying elements tend to form either solid solutions or compounds or carbides. Manganese and nickel in our Monel K500 Hydraulic Type Fittings lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements in these Monel K500 Forged Hydraulic Fittings, the austenitic structure may be obtained at room temperature. Carbide – forming elements of our Monel K500 Hydraulic Forged Fittings raise the eutectoid temperature; these elements are known as ferrite stabilizing elements.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5