Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Pipe Fittings, which needs to be turned and worked at slow speeds and low feed rates. Nickel 200 Pipe Fittings is an alloy (i.e. combination of two or more elements of which at least one is a metal, and where the resultant material has metallic properties). Nickel 200 Compression Fittings is based on nickel (65 % – 70 %) and also contains iron and manganese (5 %) and other compounds. Nickel 200 Accessories is a very expensive alloy, with cost ranging from five to ten times the cost of copper and nickel.
Nickel Alloy 200 Pipe Fittings Manufacturer In India | Nickel Alloy 200 Pipe Fittings Manufacturer In Mumbai | Nickel Alloy 200 Pipe Fittings Exporter In India | Nickel Alloy 200 Pipe Fittings Exporter In Mumbai | Nickel Alloy 200 Pipe Fittings Supplier In India | Nickel Alloy 200 Pipe Fittings Supplier In Mumbai | Nickel Alloy 200 Pipe Fittings Stockist In India | Nickel Alloy 200 Pipe Fittings Stockist In Mumbai
Its use is limited to those applications where thus Nickel 200 Ferrule Pipe Fittings cannot be replaced with cheaper alternatives than compared to carbon steel, piping more than three times as expensive. Nickel 200 Double Ferrule Pipe Fittings is notable for its toughness, which is maintained over a considerable range of temperatures. Alloy 200 Accessories is useful at temperatures up to and including 1000 Degree F in oxidizing atmospheres.
Alloy 200 Compression Pipe Fittings is a solid – solution binary alloy, where higher temperatures may be employed if the alloy is in a reducing environment. As nickel and copper are mutually soluble in all proportions, Alloy 200 Ferrule Pipe Fittings is a single – phase alloy. Alloy 200 Double Ferrule Pipe Fittings is commonly used in applications with highly corrosive conditions.
Nickel 200 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B366 ASME SB366 |
| Size | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Nickel 200 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min | – |
Nickel 200 Accessories Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for Nickel Alloy 200 Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 200 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Nickel Alloy 200 Pipe Fittings / Accessories Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 200 Pipe Fittings
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Pipe Fittings, which needs to be turned and worked at slow speeds and low feed rates. Nickel 200 Pipe Fittings is an alloy (i.e. combination of two or more elements of which at least one is a metal, and where the resultant material has metallic properties)
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
