Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 316 Tube to Union, which are more common in long products than in sheet and plate form. Stainless Steel 316 Tube Fittings have generally low weldability and formability, which gives them a higher strength than either ferritic or austenitic steels. Stainless Steel 316 Compression Fittings are resistant to stress corrosion cracking, which are further weldable but need care in selection of welding consumables and heat input.
Stainless Steel 316 Union Tube Fittings are formulated to have comparable corrosion resistance to standard austenitic steels but with enhanced strength and resistance to stress corrosion cracking. SS 316L Tube Fittings have moderate formability and are magnetic but not so much as the ferritic, martensitic and PH grades due to the 50 % austenitic phase. SS 316L Compression Fittings can develop very high strength by adding elements such as Copper, Niobium and Aluminum to the steel.
Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union | Stainless Steel 316 Tube to Union
With a suitable “aging” heat treatment, very fine particles form in the matrix of SS 316L Union Tube Fittings which imparts strength. Stainless Steel 316 Ferrule Fittings can be machined to quite intricate shapes requiring good tolerances before the final aging treatment as there is minimal distortion from the final treatment. Stainless Steel 316L Double Ferrule Fittings is in contrast to conventional hardening and tempering in martensitic steels where distortion is more of a problem.
Stainless Steel 316 / 316L Tube to Union Specifications |
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 316 / 316L Tube To Union Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316 | 0.08 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| SS 316L | 0.035 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.89 min |
Stainless Steel 316 / 316L Tube To Union Mechanical Properties
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 316 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| SS 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 316 / 316L Stainless Steel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SS 316 / 316L Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 316 / 316L Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 316 Tube to Union
Sachiya Steel International is one of the Leading Manufacture And Exporter for Stainless Steel 316 Tube to Union, which are more common in long products than in sheet and plate form
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
