Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Channel, which is being available in different sizes and shapes to our clients. The addition of a small percentage of the alloying elements in Stainless Steel 347H Angle under consideration makes it possible to retard the transformation more effectively and hence to produce better physical properties. Stainless Steel 347H C-Channel of these types show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical – properties which will be brought about by heat – treatment.
Stainless Steel 347H Channel Manufacturer In India | Stainless Steel 347H Channel Manufacturer In Mumbai | Stainless Steel 347H Channel Exporter In India | Stainless Steel 347H Channel Exporter In Mumbai | Stainless Steel 347H Channel Supplier In India | Stainless Steel 347H Channel Supplier In Mumbai | Stainless Steel 347H Channel Stockist In India | Stainless Steel 347H Channel Stockist In Mumbai
A detailed discussion of a so-called high-carbon type of Stainless Steel 347H H-Beam containing about 1.5 percent of chromium, 4.0 percent of nickel and 0.30 percent of carbon is given. By increasing the content of nickel, the transformation range in Stainless Steel 347H I-Beam is finally lowered to a point below normal atmospheric temperature.
About 25 percent of nickel is required to produce the desired effect, and Stainless Steel 347H T-Beam are produced which are not used exclusively because of their physical properties, but on account of their non – corrosive, non – scaling and heat – resisting qualities. Similar properties of these Stainless Steel 347H Chain are found in silicon – chromium steels, in chromium steels of high nickel – content, in chromium – tungsten steels, and in the high – chromium steels.
SS 347H Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 347H Angle |
: | 5mm to 9mm |
| SS 347H Channel |
: | 40mm*20mm~300mm*300mm |
| SS 347H Beam | : | 3″ thru 12.31″ |
| SS 347H Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
347H Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.04-0.10 | 2 max | 1 max | 0.045 max | 0.030 max | 17-19 | 8xC – 1.10 | 9.0-13.0 | 62.74 min |
Stainless Steel 347H Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347H Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | X6CrNiNb18-12 |
SS 347H Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
347H Steel Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347H Channel
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Channel, which is being available in different sizes and shapes to our clients. The addition of a small percentage of the alloying elements in Stainless Steel 347H Angle under consideration makes it possible to retard the transformation more effectively and hence to produce better physical properties
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5