Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Buttweld Fittings, where a hardening heat treatment is necessary to bring out the maximum hardness and wear resistance. Since these materials absorb heat very slowly, Stainless Steel 410 Elbow Butt Weld Pipe Fittings should be heated gradually and allowed to remain at temperature long enough for to ensure uniform temperature in thick sections. For maximum strength, hardness, and corrosion resistance, slowly heat Stainless Steel 410 Tee Butt Weld Pipe Fittings to 1800 Degree F (982 Degree C) and quench to room temperature in oil.
If retained austenite is known to be present after the quench to room temperature, additional hardening response in Stainless Steel 410 Reducer Butt Weld Pipe Fittings may be achieved by sub – zero cooling to about –100 Degree F (-73 Degree C). The as – quenched structure of Stainless Steel 410 Cross is quite brittle and should be stress – relieved or tempered at approximately 400 Degree F to 500 Degree F (204 Degree C to 260 Degree C) to restore some ductility.
Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings | Stainless Steel 410 Buttweld Fittings
During tempering between approximately 300 Degree F (149 Degree C) and 600 Degree F (316 Degree C), a relaxation of the martensitic structure of Stainless Steel 410 Bends occurs whereby the volumetric stresses associated with the formation of martensitic upon quenching are relieved.
Stainless Steel 410 Pipe Fittings Specifications |
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
SS 410 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 410 | min. | – | – | – | – | – | 11.5 | – | – | – |
| max. | 0.15 | 1.0 | 1.00 | 0.040 | 0.030 | 13.5 | – | 0.75 | – | |
Stainless Steel 410 Butt weld Fittings Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 410 | 480 | 275 | 16 | 95 | 201 |
Equivalent Grades for 410 Stainless Steel Pipe Fitting
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 410 | S41000 | 410S21 | 56A | 1.4006 | X12Cr13 | 2302 | SUS 410 |
SS WERKSTOFF NR.1.4006 Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 410 Buttweld Fitting Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 410 Buttweld Fittings
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Buttweld Fittings, where a hardening heat treatment is necessary to bring out the maximum hardness and wear resistance
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
