Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 5 Hydraulic Fittings, which is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Resistance to sulphuric acid is particularly exceptional but these Titanium Gr.5 Hydraulic Tube Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Our Titanium Gr.5 Forged Hydraulic Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.
Titanium Grade 5 Hydraulic Fittings Manufacturer In India | Titanium Grade 5 Hydraulic Fittings Manufacturer In Mumbai | Titanium Grade 5 Hydraulic Fittings Exporter In India | Titanium Grade 5 Hydraulic Fittings Exporter In Mumbai | Titanium Grade 5 Hydraulic Fittings Supplier In India | Titanium Grade 5 Hydraulic Fittings Supplier In Mumbai | Titanium Grade 5 Hydraulic Fittings Stockist In India | Titanium Grade 5 Hydraulic Fittings Stockist In Mumbai
Application of these Ti Alloy Gr5 Hydraulic Tube Fittings could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Post weld heat treatment in our Ti Alloy Gr5 Forged Hydraulic Fittings may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as – welded condition.
We use a range of transport partners to ship overnight these Nickel-Ti Alloy Gr5 Hydraulic Fittings within national and international countries. We offer a full range of logistics solutions for our Nickel-Ti Alloy Gr5 Hydraulic Tube Fittings from priority express services to more cost – effective economy shipments all around the globe. Our brand became the synonymous of the high quality for these Nickel-Ti Alloy Gr5 Hydraulic Forged Fittings, which provides highly safe and reliable operations.
Titanium Gr.5 Hydraulic Fittings Specifications |
||
| Standards | : | ASTM B381 / ASME SB381 |
| Size Range | : | 1/16″OD to 2″OD, 2mm OD to 50mm OD |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| End | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Titanium Gr.5 Hydraulic Fittings Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Titanium Alloy Grade 5 Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Equivalent Grades for Ti Alloy Gr5 Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 5 | 3.7165 | N56400 |
Titanium Alloy Grade 5 Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Titanium Gr.5 Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Titanium Grade 5 Hydraulic Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 5 Hydraulic Fittings, which is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Resistance to sulphuric acid is particularly exceptional but these Titanium Gr.5 Hydraulic Tube Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Our Titanium Gr.5 Forged Hydraulic Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5